Black Box Voice Pro FX700A Manual page 48

4. If there are no extensions that have a message-waiting light, dial # when
prompted to enter the extension number and all message-waiting lights will
be disabled.
Default: All stations have the message-waiting light enabled.
P 30: S
ROGRAM ETS NUMBER OF RINGS BEFORE CALL IS FORWARDED TO AUTO
1. While in programming mode, and when prompted for the program number,
enter 30.
2. Press #.
3. When prompted, press 1 (for Line 1), and then press #.
4. Enter the number of rings before the call is transferred to auto-attendant
(0-99), and then press #.
5. Repeat steps 3 and 4 to program the remaining line numbers.
Default: 3 rings for each line.
If more than one line rings to a station, a busy call will automatically be
answered by auto-attendant.
P 31: A
ROGRAM SSIGN INCOMING LINE TO FAX MACHINE
When fax switching is enabled on an incoming line, it is automatically answered by
auto-attendant. This ensures that the fax tone will be detected and properly
switched over to the fax machine.
1. While in programming mode, and when prompted for the program number,
enter 31.
2. Press #.
3. When prompted, enter the line number that will receive fax transmissions,
and then press #.
4. At the prompt, press 1 to enable or press 2 to disable, and then press #.
5. For multiple fax lines, repeat steps 3 and 4.
Default: None
M indicates that the program can be monitored using 50#.
See Program 50 for details.
CHAPTER 4: Programming the Voice Pro System
NOTE
M
- M
ATTENDANT
47