Black Box Voice Pro FX700A Manual page 47

VOICE PRO
2. Press #.
3. Press 1 to enable auto-attendant or press 2 to disable feature, and then press
#.
Default: Auto-attendant is automatically enabled.
P 28: R
ROGRAM ECORD DIRECTORY NAMES
1. While in programming mode, and when prompted for the program number,
enter 28.
2. Press #.
3. When prompted, record the directory, then press #.
Example: Record the directory by stating the extension number and/or voice
mailbox number and name of the employee for example, "Dial 10 to reach Johnny
Appleseed; dial 11 to reach Little Jack Horner.".
Incoming callers must dial 9 during the greeting to access the directory.
P 29: M
ROGRAM ESSAGE
The message-waiting light, when disabled, will give the extension user a stutter
tone before giving dial tone if there are new messages in the user's mailbox. This is
especially useful if the extension in question does not have a message-waiting light
for this feature to operate. Please note that telephone sets must be equipped with a
90-volt neon message-waiting light for this feature to operate.
1. While in programming mode, and when prompted for the program number,
enter 29.
2. Press #.
3. When prompted, consecutively dial station numbers that are to have a
message-waiting light, and then press #. For example, for stations 10, 11, and
12 to light the message-waiting light press 101112#. Or dial 99 for all
extensions, and then press #.
46
M indicates that the program can be monitored using 50#.
See Program 50 for details.
HELPFUL HINT
Write out your directory listing before recording.
-
WAITING LIGHT
M
NOTE
M