Black Box Voice Pro FX700A Manual page 35

VOICE PRO
The system will verify the correct password.
After three incorrect password attempts, you will be rejected from the
system.
P 1: A
ROGRAM SSIGN A SYSTEM PASSWORD
1. While in programming mode, and when prompted for the program number,
enter 1.
2. Press #.
3. When prompted for a new password, enter a 4-digit password and press #.
4. When asked to re-enter the password, enter it again and press #. (The default
is 1234.)
Remember your password. If you forget it, you must either use the
hardware reset button, which returns system program settings to their
default states, or call Black Box Technical Support at 724-746-5500 to
reset the password for you.
P 2: I
ROGRAM DENTIFY INSTALLED TELEPHONE COMPANY LINES
1. While in programming mode and prompted for the program number, press
2.
2. Press #.
3. Enter the installed line numbers:
a. If one line is installed, press 1.
b. If two lines are installed, press 1 2.
c. If three lines are installed, press 1 2 3.
d. If four lines are installed, press 1 2 3 4.
4. Press #.
34
M indicates that the program can be monitored using
Program 50 (50#). See Program 50 for details.
NOTE
IMPORTANT
M