Black Box Voice Pro FX700A Manual page 32

S 1: A
TEP CCESS PROGRAM MODE FROM A CONNECTED STATION
1. Pick up the corded handset and listen for a dial tone.
2. Press #.
3. When prompted for the password, enter the default password 1 2 3 4 and
press #.
4. The system will verify the correct password.
After three incorrect password attempts, you will be rejected from the
system.
S 2: I
TEP DENTIFY INSTALLED TELEPHONE COMPANY LINES
1. When prompted for the program number, press 2.
2. Press #.
3. Enter the installed line numbers:
a. If one line is installed, press 1.
b. If two lines are installed, press 1 2.
c. If three lines are installed, press 1 2 3.
d. If four lines are installed, press 1 2 3 4.
4. Press #.
S 3: S
TEP ET THE CLOCK
1. Remain in programming mode, and when prompted for the program
number, enter 19.
2. Press #.
3. Enter the hour (valid entries are 1 – 12) and press #.
4. Enter minutes (valid entries are 00 – 59) and press #.
5. Press 1 for AM or 2 for PM and press #. (Default is 12:00 PM)
For example, to set the time to 3:04 PM, dial 3#04#2#. (3 is the hour, 04 is minutes,
and 2 is PM.)
CHAPTER 4: Programming the Voice Pro System
NOTE
31