Temperature Alarms - Danfoss ADAP-KOOL AK-LM 340 User Manual

Configuration - continued

Temperature alarms

1. Go to Configuration menu
2. Select Temperature alarms
3. Temperature alarms
58
We have not used this function in our
example. The image is included for guidance
only.
RS8GV202 © Danfoss 2016-06
3. Temperature alarms
The function monitors a temperature and issues an
alarm if the set value is exceeded.
• Name
• Temp. input select
• Alarm limit
• Alarm type
Define whether the alarm is to be activated at
temperatures that are too high or too low.
• Alarm delay
Time delay before the alarm becomes active
• Alarm text
• DI-signal
Here a DI signal can be selected, which can stop
the alarm from the function.
AK-LM 340