Beckhoff EtherCAT EL6752 Documentation page 69

Parameterization and commissioning
Fig. 68: Example of start-up CMD (0x8000:01; 0xF800:01 and 0xF800:02) that are ignored by the slave
terminal after successfully setting the MACId and baud rate using ADS
ADS command (reset)
IDXGRP=0x1F480
Index Offset 0x00
LEN=6
DATA[0]=0
DATA[1]=0
DATA[2]=0
DATA[3]=0
DATA[4]=0
DATA[5]=0
Ams Net Id: die der EL6752
Ams Port: 200
In this way the data can be permanently deleted again and the terminal behaves as in the delivery condition.
EL6752 Version: 2.1 69