6.2 Tower Mounting
Use the included tower stands to mount the UPS in an upright tower position by
following the steps below.
Assemble the tower stands and the tower stand expanders
1
size of the UPS (see Figure 6-3 & Figure 6-4).
(Figure 6-3: Assemble the Tower
Stands for 5/ 6kVA UPS)
Pull out the two panels and the two Delta logo nameplates
2
them 90° clockwise
Delta Logo
Nameplate × 2
(Figure 6-5: Rotate the Two Panels and Two Delta Logo Nameplates)
Amplon RT Series
Tower Stand
× 4 PCS
Tower Stand
Expander × 4 PCS
and re-insert them (see Figure 6-5).
3
3
2
E S
C
B A
T T
E R
Panel × 2
(Figure 6-4: Assemble the Tower
Stands for 8/ 10kVA UPS)
3
2
Y P
A C
K
2 8
according to the
1
Tower Stand
× 4 PCS
Tower Stand
Expander × 6 PCS
2
, rotate