Tower Mounting The Ups Or The Delta External Battery Pack (Optional) - Delta M-1K User Manual

3.3 Tower Mounting the UPS or the Delta External
Battery Pack (Optional)
You can mount the UPS or the Delta external battery pack (only applicable
for 3kVA model) in an upright position by following the procedures below.
The UPS and the Delta external battery pack use identical mounting kits and
their mounting procedures are the same. Please note that the package does
not include any tower-mounting kits. If you need to purchase any, please
contact Delta customer service.
NOTE :
1. The tower stand picture shown below is just descriptive.
2. Leave adequate space at least 15cm in front and rear of the UPS for
proper ventilation.
Tower mounting procedures
z
z
Remove the four screws from the front plastic panel. See Figure 3-5.
1
From the back of the front plastic panel, carefully push the backside of the
2
operation panel until it slides out of the front plastic panel. Please handle
with care to avoid damaging the cable connecting the operation panel and
the UPS's internal connector. See Figure 3-6.
Amplon M Series
(Figure 3-5 : Remove the Front Plastic Panel)
2 2