Delta Amplon Series User Manual page 29

Alarm
z
z
When any external battery pack connected to the UPS has the following
problems, the UPS system will sound an alarm. Please see the table below.
External Battery
No.
Pack Status
1
Battery Mode
2
Battery Low Warning
Battery Missing/
3
Weak Battery/ Battery
Replacement
4
Overload
5
NOTE :
*: After reconnecting or replacing the batteries, it might take a while for
the UPS to switch off the alarm automatically. If, after a period of time, the
audible alarm still exists, please manually initiate a battery test. Please
follow the route below to execute the manual battery test in order to clear
the alarm.
Route: press the button
Test → select Start Battery Test. Fore relevant information, please refer
to 9.2 Main Menu.
The alarm beeps once every 2 seconds.
The alarm beeps once every 0.5 second.
The alarm beeps once every 2 seconds.
1. Overload_105%~125%: The alarm beeps
2. Overload_125%~150%: The alarm beeps
The alarm beeps continuously for 5 seconds
when the UPS detects an internal fault. After
Fault
the 5-seconds long beep, the alarm beeps
once every 2 seconds.
Chapter 5
Description
once every 2 seconds.
once every 0.5 second.
for 0.1 second → tap the icon
2 5
Communication Interfaces
→ select
Maintenance