Chapter 9 : Lcd Display & Settings; Initial Setting Screen - Delta Amplon Series User Manual

Chapter 9 : LCD Display & Settings
NOTE :
1. Please refer to Chapter 3: Operation Panel to learn how to operate the
operation panel and understand every icon/ diagram definition.
2. Each of the display diagrams shown in this chapter is for reference only.
Actual display depends on the operation of the UPS.
The following flow chart helps you to understand how to navigate each display
screen.

9.1 Initial Setting Screen

When the UPS is powered on at first time, the LCD display will enter into the Initial
Setting Screen and you can modify language, output voltage, battery parameters
based on actual needs during initial setup. The default settings of language, output
voltage, and battery parameters may vary according to different models. Press the
button to continue if there is no special requirement. After you configure the
Language, Date & Time, Output Setting, External Battery Type and External
Battery Capacity settings, the LCD display will move to the Main Screen that
shows the current operation mode.
Chapter 9
4 3
LCD Display & Settings