Delta Amplon Series User Manual page 14

Multi-
No. function
Button
2
Enter
Button
3
Scrolling
Up Button
Amplon RT Series
NOTE :
1. When the UPS clears the fault condition, it
means that the buzzer/ warning message has
been turned off. To eliminate the fault detected,
please refer to Chapter 11: Troubleshooting
for relevant solutions.
2. The function mentioned above is only appli-
cable to the condition when the UPS has a
fault situation and the inverter is off.
The button has multiple functions. Please refer to the following
for detailed information.
1. Entering into the setup mode
In the Main Screen (that shows the current operation mode),
press the button for 0.1 second and the UPS will enter into
the Main Menu (setup mode). Please refer to Chapter 9:
LCD Display & Settings.
2. Selecting and confirming the parameter in setup mode
In setup mode, press the button to choose the parameter
you want to change, and the parameter will flash. Press the
Scrolling Up or the Scrolling Down button to change the
parameter and press the button again to confirm the change.
The button has multiple functions. Please refer to the following
for detailed information.
1. Scrolling Up/ Increasing Number
In the Main Screen, press the button for 0.1 second and
z
z
the UPS will directly enter into the Measurement Menu's
level 3 (see Figure 9-1: Menu Tree), which contains
related Output information.
In setup up mode, the button is used to navigate the set-
z
z
ting items. Press the button for 0.1 second to go to the
previous setting item.
Description
1 0