Using The Keypad & Led Display On Ip20 Frame Size 2 & 3; Keypad Layout And Function - Standard Led Keypad; Changing Parameters - Invertek Drives Eco Optidrive Series User Manual

6. Using the Keypad & LED Display on IP20 Frame Size 2 & 3
The drive is configured and its operation monitored via the keypad and display.
6.1. Keypad Layout and Function – Standard LED Keypad
NAVIGATE
UP
DOWN
RESET /
STOP
START

6.2. Changing Parameters

The
Use
The parameter value is now adjusted and automatically stored. Press the
24
Optidrive Eco User Guide Revision 2.01
Used to display real-time information, to access and exit
parameter edit mode and to store parameter changes
Used to increase speed in real-time mode or to increase
parameter values in parameter edit mode
Used to decrease speed in real-time mode or to decrease
parameter values in parameter edit mode
Used to reset a tripped drive.
When in Keypad mode is used to Stop a running drive.
When in keypad mode, used to Start a stopped drive or to
reverse the direction of rotation if bi-directional keypad
mode is enabled
Procedure
Power on Drive
Press and hold the
Press the
and can be used to select the desired parameter
Select the required parameter, e.g. P1-02
Press the
the and keys to adjust the value, e.g. set to 10
Press the
operating mode
for >2 seconds
Key
button
key
key for >2 seconds to return to
Display shows...
   
    
    
    
etc..
    
 .
  .
    
   
www.microlectra.nl