Accessing And Changing Parameter Values; Resetting Parameters To Factory Default Settings; Resetting Parameters To User Default Settings - Invertek Drives Eco Optidrive Series User Manual

5.4. Accessing and Changing Parameter Values

STOP
37kW 400V 3Ph
Hold navigate button in for >1
sec

5.5. Resetting Parameters to Factory Default Settings

Note: Parameters cannot be defaulted whilst P2-39=1 (parameter set locked).

5.6. Resetting Parameters to User Default Settings

The current parameter settings of the drive can be stored internally within the drive as the standard default settings. This does not affect the
procedure for returning the drive to factory default settings as described above.
P6-29 (Save user parameters as default) can be enabled (set to 1) to invoke a parameter save of the current parameter values as the
standard defaults for the drive. Parameter menu group 6 can only be accessed with advanced security level access (Default P1-14=201).
Note: Parameters cannot be defaulted whilst P2-39=1 (parameter set locked).
22
Optidrive Eco User Guide Revision 2.01
Maximum Speed Limit
P1-01
50.0Hz
Use up and down keys to scroll to
required parameter.
STOP
37kW 400V 3Ph
Hold down the Up, Down, Start
and Stop keys for >2s
STOP
37kW 400V 3Ph
Hold down the Up, Down and
Stop keys for >2s
Maximum Speed Limit

50.0Hz

200.0
P1-01
Presss / release navigate button
when required parameter
shown
Load default parameters
P-DEF
Press STOP key to Reset
The display shows P-Def. Drive is
returned to factory settings. Press
the Stop key
Load default parameters
U-DEF
Press STOP key to Reset
The display shows U-Def. Drive is
returned to User Default settings.
Press the Stop key
Maximum Speed Limit
45.0Hz
0.0 200.0
P1-01
Use up and down keys to edit
parameter value.




www.microlectra.nl
0.0