Data Report - netvox R718H2 User Manual

4.4 Data Report

When the device is powered on, it will immediately send a version package report and a report data
including the current pulse count and voltage value.
The device sends data in the default configuration before any configuration is done.
The pulse count is sent according to the maximum and minimum interval, and the count is
automatically cleared after transmission;
When the count reaches 65535 (0XFF), a report is automatically sent (sending value is 65535), and
the report loop is restarted.
The relevant instructions are as follows:
Uplink：
R
71
8 0x3F 0x01
H
2
DownLink：
ConfigRepo
rtReq
ConfigRepo
rtRsp R718
H2
ReadConfig
ReportReq
ReadConfig
ReportRsp
Battery(1Byte,
Pulse1Count(2byte)
unit:0.1V)
0x01 MinTim
e(2bytes
Unit:s)
0x81 Status(0
x00_suc
0x3F cess)
0x02
MinTime
0x82 (2bytes
Unit:s)
Pulse2Count(2byte)
MaxTime( BatteryChang
2bytes e(1byte
Unit:s) Unit:0.1v)
Reserved (8Bytes,Fixed 0x00)
Reserved (9Bytes,Fixed 0x00)
MaxTime BatteryChang
(2bytes e(1byte
Unit:s) Unit:0.1v)
5
Reserved(3Bytes,fixed
0x00)
Reserved (4Bytes,Fixed 0x00)
Reserved (4Bytes,Fixed 0x00)