Related Manuals for netvox R718CJ
Summary of Contents for netvox R718CJ
- Page 1 R718CJ/CK/CT/CE Mode： Wireless Thermocouple Interface for J/K/T/E Type Thermocouple Wireless Thermocouple Interface for J/K/T/E Type Thermocouple R718CJ/CK/CT/CE User Manual...
-
Page 2: Table Of Contents
Table of Content 1. Introduction................................2 2. Appearance................................. 3 3. Main Features................................3 4.Set up Instruction.................................3 4.1 Power on and Turn on / off..........................3 4.2 Join Into Lora Network............................ 4 4.3 Function Key..............................4 4.4 Data Report...............................4 5. Restore to Factory Setting............................5 6. -
Page 3: Introduction
Introduction R718C is Netvox ClassA type detection temperature equipment based on LoRaWAN open protocol. R718C can be connected to type K (R718CK), J type thermocouple (R718CJ) and other types of thermocouples according to requirements, compatible with LoRaWAN protocol. R718CJ (nickel-chromium-copper-nickel thermocouple): the temperature measurement range is -210~1200 C. -
Page 4: Appearance
2. Appearance Fig.1 Appearance 3. Main Features Compatible with LoRa protocol. 2 x ER14505 AA lithium batteries（3.6V, 2400mah/section). Parallel power supply. Simple set up and installation. 4.Set up Instruction 4.1 Power on and Turn on / off (1) Insert two 3.6V batteries to the battery holder of the device. -
Page 5: Join Into Lora Network
4.2 Join Into Lora Network To join the device into LoRa network to communicate with LoRa gateway. The network operation is as following: After the device is turned on, it starts to actively search for the network. If it searches a network that can be joined, the green indicator light will stay on for 5 seconds to indicate that the network is successfully joined. -
Page 6: Restore To Factory Setting
5. Restore to Factory Setting Operation method: press and hold the button for 5 seconds and the green LED flashes for 20 times, and the device will be turned off after the operation. 6. Sleeping Mode The device is designed to enter sleeping mode for power-saving in some situations: (A) While the device is in the network →... -
Page 7: Important Maintenance Instruction
9. Important Maintenance Instruction Your device is a product of superior design and craftsmanship and should be used with care. The following suggestions will help you use the warranty service effectively. • Keep the equipment dry. Rain, moisture, and various liquids or moisture may contain minerals that can corrode electronic circuits.