Table of Content 1. Introduction ................................2 2. Appearance ................................3 3. Main Features ................................3 4.Set up Instruction ..............................4 4.1 Power on and Turn on / off ..........................4 4.2 Join Into LoRa Network ..........................4 4.3 Function Key ..............................4 4.4 Data Report ..............................
Introduction The R718IB is a Class A type devices based on the LoRaWAN open protocol and is compatible with the LoRaWAN protocol. 1. To check the device voltage according to the configuration time interval. 2. To press the function key to detect the current voltage.
2. Appearance Fig.1 R718IB Appearance 3. Main Features Compatible with LoRaWAN protocol. Powered by 2 x ER14505 3.6V Lithium AA battery Capable to detect voltage input 0-10V Easy set up and installation...
The green indicator will stay on for 5 seconds to show it joins into the network, otherwise, the green indicator does not work. (2) If R718IB had been joined into a LoRa network, remove and insert the batteries; it will repeat step (1).
1. Press and hold function key for 5 seconds till the green indicator flashes and then release; LED flashes quickly 20 times. 2. R718IB is at off mode by default setting after restoring to factory setting. Note: The device operation of turning off is the same as the “Restore Factory Settings” operation.
(B) When it is not in the network → R718IB will enter sleeping mode and wake up every 15 seconds to search a network to join in the first two minutes. After two minutes, it will wake up every 15 minutes to request to join the network.