Operating The System Usinga Smartphone; Operating The System Using Text Messaging - jablotron 100 User Manual

10 OPERATING THE JABLOTRON 100 SYSTEM
MyJABLOTRON - LITE Version
Depending on your country (or region) you may be able to open an account and/or services in the
MyJABLOTRON – LITE internet application. The fi rst-time user will be e-mailed a password for the initial
login. The password can then be changed at any time in Settings. If a user already has an account within
the system, any changes to the access rights will be refl ected in that user's MyJABLOTRON dashboard.
Once logged into the account, the system shows all active devices that can be monitored or controlled,
depending on the registered MyJABLOTRON version.
The LITE service package is limited in functionality and minimizes demands for data transfer. LITE is
based on the PROFI version with the following modifi cations:
Options
View the current system status.
Set/unset the entire system or part of it.
Control programmable outputs.
View the event history.
Send notifi cations to selected users
Operate the system through the on-screen keypad
Capture images from camera detectors
View the photo gallery from detectors with cameras
Monitor current and historic detector values such as temperature or energy consumption.
* Communication with the secured premises is not continuous, the system's current status comes up only once a connection is
established. The connection to the system takes about one minute.
OPERATING THE SYSTEM USING
A SMARTPHONE
If a MyJABLOTRON user account is set up (see previous section), the
alarm system can be monitored and controlled remotely using
MyJABLOTRON for smart phones running either Android (ver. 2.4 or
higher), iPhone (ver. 7 or higher) or Windows Mobile. The application can
be downloaded free of charge after logging in MyJABLOTRON, or from
any Android Market, AppStore, etc. Usernames and logins for
MyJABLOTRON smart phone apps are identical to those for the
MyJABLOTRON internet account.
OPERATING THE SYSTEM USING TEXT
MESSAGING
Individual sections and programmable outputs can be controlled using
text messaging. The text message to operate the system is: CODE
COMMAND. The actual COMMANDs are predefi ned (SET/UNSET).
There may also be an additional numeric parameter that identifi es the
specifi c section. The commands to control the outputs can be
programmed by the system installer.
LITE PROFI
* 
 * 
 * 

-

-

-

-

-

-