jablotron 100 User Manual page 5

4 OPERATING THE JABLOTRON 100 SYSTEM
The various types of access modules and their
combinations
CARD READER
allows control of the system using
segments and touchless authorization
(RFID card/tag).
When unsetting the alarm using the segment buttons
user authorization is always required. When setting the
alarm and controlling automated processes using the
segment buttons, user authorization is optional for each
segment.
If the user wants to simultaneously control multiple segments, authorization is required only once.
For example, the user can at the same time set the house while unsetting the garage.
Recommended Touchless Chips: JABLOTRON 100, Oasis, Azor, or other chips operating at 125 kHz
EM. For higher security the alarm system can be set up so that both the RFID chip and user code must be
used to authorize.
THE KEYPAD AUTHORIZATION CODE
can consist of up to seven digits: a prefi x (one to three digits), an asterisk * (which separates the prefi x and main code), and
a four digit code. Examples include: 123*1234, or 1*1234. Each user can change the second four-digit code (after the prefi x and
asterisk) on the LCD keypad. For guarded premises with a smaller number of users the prefi x can be omitted. In this case only a
four-digit code is required. These types of codes can only be changed by the system administrator.
KEYPAD WITH CARD READER
the user can control the system by
segments and authorization, using
either entering a code or the touchless
method (RFID card/tag), or a combina-
tion of both for higher security.
A user can be authorized by entering their assigned
code or using their RFID card/tag. Each user can have
one code and up to two RFID chips (cards or tags).
KEYPAD WITH DISPLAY AND CARD
READER
the user can control the system by
segments and authorization, using
either a code, the touchless method
(RFID card/tag), both code and card/
tag for higher security, or by authori-
zing and using the options available on
the keypad's LCD display.