Changing, Deleting Or Adding An Rfid Card/Tag; Changing A Username Or Phone Number; Adding / Deleting A User; Event History - jablotron 100 User Manual

CUSTOMIZING THE SYSTEM

CHANGING, DELETING OR ADDING AN RFID CARD/TAG

Each user can add, modify or delete their RFID cards/tags using the LCD keypad menu. These changes
are done after authorization by selecting Settings  Users  User  Access card 1 (or 2). To enter a new
RFID card/tag, you must enter into edit mode (access card 1 or 2 will start to fl ash) by pressing Enter. Then
The RFID card/tag must be placed on to the reader or the serial number must be manually entered. After
confi rming by pressing Enter again, the RFID card/tag is added. To delete an access card enter "0" into the
serial number fi eld. After the changes are complete the change must be saved by selecting Save when the
system prompts Save Settings?
The system administrator can add, change and delete RFID cards/tags from both the LCD keypad menu
and J-Link.

CHANGING A USERNAME OR PHONE NUMBER

Each user can add, modify or delete his phone number or change his name on the LCD keypad menu.
This can be done after authorization by selecting Settings  Users  User  Phone (or Name). To make
changes the user must be in edit mode. This is done by pressing Enter on a respective row. After making
the changes, they are confi rmed by pressing Enter again. To delete a phone number enter "0" into the
phone number fi eld. After the changes are complete the change must be saved by selecting Save when the
system prompts Save Settings?
The system administrator can add, modify or delete user's phone number or change user's name from
both the LCD keypad menu and J-Link.

ADDING / DELETING A USER

Only the system administrator (or service technician) can add a new user or delete a user in the system.
This can be done only through the J-Link program, or the F-Link program in the case of a technician.
When creating a new user, an authorization code must be created or an RFID card/tag must be assigned
(or any combination of these). Furthermore access permissions (rights) must be set up: what sections the
user may operate, what programmable outputs they can control, and what type of authorization will
be required.

EVENT HISTORY

The security system stores all performed operations and events
(setting, unsetting, alarms, faults, messages sent to users and
ARC) to the micro SD card in the system's control panel. Each
entry includes the date, time (start and end), and source (cause
/ origin) of the event. Events are not deleted; the entire system
history of the guarded premises is archived. The memory has the
capacity to store several million records.
The different ways of browsing through the system's event
history are described on the next page.
13