Using The System Keypad - jablotron 100 User Manual

OPERATING THE JABLOTRON 100 SYSTEM
Ways of Operating the JABLOTRON 100
On-site:
a
System keypad
a
System keyfob
a
Computer using a USB cable and J-Link program
Remotely:
a
Telephone using the voice menu
a
Computer via the MyJABLOTRON web interface
a
Application in a smart phone
a
Mobile - using text messaging
a
Computer via the internet using J-Link
a
Dialling-in from an authorized telephone number
(only for operating programmable outputs)

USING THE SYSTEM KEYPAD

The system can be operated directly (setting or unsetting the alarm
and automation) using two-button segments on the keypad. The
segment buttons are clearly labelled and coloured (using traffi c light
logic) so that each segment's status is readily evident. The segment can
also be used to monitor its status (e.g. garage door open) or to control
various automated devices (for example heating or window shutters).
A segment can also be set up to call for help in an emergency (as a
medical or panic alarm). The maximum number of segments is twenty.
Continuous green
UNSET / OFF
Flashes green
ENTRY DELAY
Flashes red
ALARM
Continuous green
EVERYTHING OK
Flashes green
CONTROL
Continuous orange
FAULT
Continuous red
SET / ON
Flashes red
ALARM / ALARM MEMORY
Continuous orange
PARTIALLY SET
Continuous green
UNSET / OFF
Flashes green
ENTRY DELAY
Continuous red
SET / ON
Flashes red
ALARM /
ALARM MEMORY
Continuous orange
PARTIALLY SET
Access module
CARD READER / KEYPAD
3