Operating The System Using The Internet And Myjablotron - jablotron 100 User Manual

OPERATING THE JABLOTRON 100 SYSTEM
OPERATING THE SYSTEM USING
THE INTERNET AND MyJABLOTRON
The JABLOTRON 100 can easily and conveniently be operated
using your computer via the internet and the MyJABLOTRON web
interface, which is accessible from www.myjablotron.com. For more
information about this web interface please see the chapter What is the
MyJABLOTRON Web Interface? below.
MyJABLOTRON - PROFI Version
Depending on your country or region, a web account is set up in MyJABLOTRON by an authorized
JABLOTRON partner. The login name is the user's e-mail address. The password can be changed at any
time in the user settings.
Once logged into the account, the system shows all active devices that can be monitored or controlled.
To operate the system, the computer may prompt you to enter an authorization code at the beginning.
Subsequent actions will not require repeated authorization.
On the left vertical menu of the home page you can select to view either an on-screen keypad or a
complete system overview. The on-screen keypad allows operating the system by clicking on the segment
buttons – just as on the real keypad.
The "Overview" is arranged into horizontal tabs: "Sections", "Automation (PG)", and tabs representing
the detectors used in your system (for example you may have "Temperatures", "Camera detector", or
"Electricity meters").
Tabs:
a
Sections - allows to view and operate all the sections
in the system.
a
Automation (PG) - allows to view all the programmable system
outputs. To operate the programmable outputs using
MyJABLOTRON the actual outputs must physically be turned
on at least once after the MyJABLOTRON account is activated.
a
Temperatures - allows to view the current temperature for each
thermometer installed. Shows the history as well as graphs of
the temperature changes over time.
a
Camera detector - allows to take real-time snapshots with any
installed motion detector with camera, or look at past photos
taken with these detectors (picture gallery).
The bottom of the home page has an overview of the most recent system events.
MyJABLOTRON offers free notifi cations (via text messaging, e-mail, or push messages) for selected
system section events, programmable outputs, thermometers or meters. These notifi cations can be set up
in the "Settings" menu.
Each system can have only one administrator (owner). This user has the right to assign and remove
access rights for other users. The system will automatically create a new account for each new user that is
set up by the administrator. Notifi cation of system access will be sent, along with the password, to the
established user's e-mail address (login name). If a user already has an account within the system, any
changes to the access rights will be refl ected in that user's MyJABLOTRON dashboard.
9