Table of Contents
Advertisement
2. OPERATING THE JA-10 SYSTEM
For more information, consult confi guration of the remote control with your service technician.
More detailed information is available in manuals to particular keyfobs.
2.4
OPERATING THE CONTROL PANEL USING
THE MyJABLOTRON SMARTPHONE APP
If the user account is created in the MyJABLOTRON the alarm system
can be monitored and controlled remotely using MyJABLOTRON app for
smart phones running either on Android (ver. 4.0.3 or higher) or iPhone
(ver. 9 or later). The application can be downloaded free of charge from
Google play and App Store.
Usernames and login credentials for the MyJABLOTRON smartphone
app are created when the system is registered by service technician.
2.5
OPERATING THE CONTROL PANEL BY SMS
If there is a GSM installed in the control panel then it is possible to use SMS commands to control Indi-
vidual sections and programmable outputs just like the keypad function buttons. The form of text message
to operate the system is: CODE_COMMAND. The actual commands are predefi ned (SET/UNSET) with an
additional numeric parameter which identifi es a specifi c section.
One SMS can control multiple sections at the same time. In this case,
added numbers in the command defi ne sections.
Example of an SMS command used to set sections 2 and 4.
The underscore "_" sign stands for a space between words.
CODE_SET_2_4
The commands to control the programmable outputs can be progra-
mmed by a service technician. For example, you may choose GARAGE
DOOR as your command to open garage door. It is also possible to confi gure the system not to require a
code before a command. In such case the command is automatically identifi ed when the system recognizes
the user's phone number from which the SMS was sent.
WARNING: It is necessary to use this function with caution. Remote setting and unsetting may cause un-
wanted alarms or prevent setting when there are other people still present in the building.
2.6
OPERATING THE CONTROL PANEL USING THE VOICE MENU
If there is a GSM or a PSTN communicator installed in the control panel, the system can be controlled
from a mobile phone or land line through a simple voice menu, which guides the user through a series of
options in the preconfi gured language. To access the voice menu, you just dial the control panel's phone
number.
Access to the voice menu can be enabled either to all telephone numbers
without restrictions or only to authorized phone numbers stored in the control
panel. Depending on the confi guration, authorization by entering a valid
code on a phone keypad may be required. When the user enters the menu,
the system will give an update of the current status of all sections assigned
to the user. The caller then can control these sections, either individually or
collectively, using phone keypad and available menu options.
13
Hide quick links:
Advertisement
Table of Contents
