Taylor 428 Operator's Manual page 26

Step O - Self- Closing Door Assembly
Position the torque arm by inserting it down into the
hole on the torque rotor which protrudes from the door.
Verify proper installation by moving the torque rotor
back and forth to be sure it moves freely.
Figure 37
Proceed to Step 18.
Step 18
Slide the long drip pan into the hole in the front panel.
Figure 38
050415
Operating Procedures
Step 19
Install the front drip tray and splash shield beneath the
door spout.
Step 20
Lay the air/mix feed tube (optional) in the bottom of the
mix hopper.
22
Figure 39
Figure 40
Model 428