Taylor 428 Operator's Manual page 4

Section 8 Troubleshooting Guide
Section 9 Parts Replacement Schedule
Section 10 Limited Warranty on Equipment
Section 11 Limited Warranty on Parts
Note: Continuing research results in steady improvements; therefore, information
in this manual is subject to change without notice.
Note: Only instructions originating from the factory or its authorized translation
representative(s) are considered to be the original set of instructions.
E 2001 Taylor Company (Original Publication)
(Updated July, 2015)
055058- M
Any unauthorized reproduction, disclosure, or distribution of copies by any person of any portion of this work
may be a violation of Copyright Law of the United States of America and other countries, could result in the
awarding of Statutory Damages of up to $250,000 (17 USC 504) for infringement, and may result in further
civil and criminal penalties.
All rights reserved.
Model 428
Table of Contents - Page 2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Taylor Company
750 N. Blackhawk Blvd.
Rockton, IL 61072
30
32
33
35
Table of Contents