Taylor 428 Operator's Manual page 23

Freezer Door Assembly - Self- Closing/
Prime Plug Door
Note: The Model 428 comes equipped with two
door options: a standard door without a prime
plug or a self- closing door with a prime plug.
Follow the appropriate assembly procedures for your
style door. (For standard door ([no prime plug]
assembly instructions, go to page 17 and perform
Steps 10 - 17).
Step A - Self- Closing Door Assembly
Install the o- rings on the draw valve and lubricate.
Figure 23
Step B - Self- Closing Door Assembly
Turn the door upside down. Insert the spring.
Figure 24
Step C - Self- Closing Door Assembly
Insert the draw valve into the door. Line up the small
hole on each side of the draw valve with the slot on
each side of the door spout.
Model 428
Step D - Self- Closing Door Assembly
Apply firm downward pressure on the draw valve and
center the draw valve hole in the small slot on the left
side of the spout. Insert the draw valve handle through
the slot and into the draw valve hole.
Step E - Self- Closing Door Assembly
Move the draw handle to the forward position to allow
installation of ice buster.
19
Figure 25
Figure 26
Figure 27
Operating Procedures