Operating Of The Integrated Electronic Temperature Regulator; Changing The Set Value; Figure 13 Front View Of The Temperature Regulator - M&C CSS Series Instruction Manual

16

OPERATING OF THE INTEGRATED ELECTRONIC TEMPERATURE REGULATOR

During normal operation, the display of the temperature regulator shows the actual cooling temperature.
Figure 13 Front view of the temperature regulator
16.1

CHANGING THE SET VALUE

For changing the set value, press the P-button < 2 s. The set value, adjusted at the factory to 5 °C
[41 °F], is shown. With both arrow keys, the set value can be set upwards or downwards. However, this
value should not be adjusted below +2 °C [35.6 °F], otherwise freezing up of the heat exchanger is
possible. If the value is set above ambient temperature, the cooler will not work.
30 CSS-V | 1.01.02 www.mc-techgroup.com