Connecting Signal Lines; Figure 6 Connecting The Collective Alarm - M&C CSS Series Instruction Manual

12.3.1 CONNECTING SIGNAL LINES

The electrical connection of the collective alarm (cooler, liquid and flow) is a 6-pole male connector,
which is located at the back or top of the housing.
The matching 6-pole female connector is part of the scope of delivery.
The male connector is connected as follows:
Unterer Kanal
Lower channel
Oberer Kanal
Upper channel
Figure 6 Connecting the collective alarm
For CSS-V1 the collective alarm of the lower channel is connected (4, 5, 6).
For CSS-V2 both channels are connected with the cooler alarm and with one liquid and one flow alarm
each.
N O T E !
20
Status Alarm
Buchse/Female X2
Intern Extern
6
5
4
3
2
1
Please install the signal lines separated from the power supply
lines.
CSS-V | 1.01.02
Kontaktbelastung
Contact rating
24 V AC/DC 0.5 A
Stecker/male connector Typ Phoenix MSTB
2,5/6-STF 5,08
www.mc-techgroup.com