Electrical Connections - M&C CSS Series Instruction Manual

12.3 ELECTRICAL CONNECTIONS

W A R N I N G !
N O T E !
The gas conditioning units CSS-V1 and CSS-V2 are available with either 230 V/50 Hz or 115 V/50 to
60 Hz (for circuit diagram see appendix). 6.3 A time-lag fuses are used on all models as fuse protection.
The fuses are located inside of the cold appliance socket.
The electrical connection is made via the 2 m [6.56 ft] mains cable with cold appliance plug optionally at
the back side or the top of the housing.
www.mc-techgroup.com
Wrong supply voltage can damage the equipment. When connecting
the equipment, please ensure that the supply voltage is identical
with the information provided on the model type plate!
For the assembly of power installations with rated voltages up to
1000 V, the requirements of VDE 0100 and relevant standards and
specifications must be observed!
The main circuit is equipped with a fuse corresponding to the
nominal current (over current protection); for electrical details see
technical data (chapter 8).
CSS-V | 1.01.02 19