Temperature Alarms From Cooler And Temperature Control Module; Flow Disturbance And Liquid Alarms - M&C CSS Series Instruction Manual

17.2 TEMPERATURE ALARMS FROM COOLER AND TEMPERATURE CONTROL
MODULE
Error message
Lowtemp.: 1
Hightemp: 1
T> Max: 1
T <min:1
Lowtemp.: 2, 3
Hightemp.: 2, 3
T> Max.: 2, 3
T <Min:2, 3
For channels 2 and 3 appears when the control temperature is fallen below (+10° C [+50 °F] alarm
hysteresis) of the following screen:
This prevents the heated line or the heated probe from overheating due to a defect! The triggered alarm
(red LED) must be acknowledged by pressing any key. If the error is not corrected, the error screen
comes back after 60 s.
17.3

FLOW DISTURBANCE AND LIQUID ALARMS

Error message
FA-Warn: 1, 2
LA-Alarm: 1, 2
LA-Break: 1, 2
In case of liquid alarm and activated LA-Reset (see 16.7) the following screen occurs :
www.mc-techgroup.com
Alarm Warning
x -
x -
x
x
- x
x -
x
x
Alarm Warning
- x
x -
x -
CSS-VC-1.6 | 1.01.03
LED Error
red Low temperature cooler
red High temperature cooler
red Temperature sensor range exceeded
=> sensor defective
red Temperature sensor measuring range
fallen below => sensor defective
yellow Low temperature channel 2, 3
red High temperature channel 2, 3
red Temperature sensor range exceeded
=> sensor defective
red Temperature sensor measuring range
fallen below => sensor defective
LED Error
yellow Flow disturbance channels 1 and/or 2
red Liquid alarm channel 1and/or 2
red Cable break liquid sensor channel 1 and/or 2
41