Unit Test - Freescale Semiconductor i.MX 6Solo Reference Manual

Unit Test

• CONFIG_FB: includes frame buffer support in the Linux kernel. In menu
configuration, this option is available under:
Device Drivers > Graphics support > Support for frame buffer devices
By default, this option is Y for all architectures.
• CONFIG_FB_MXC: option for the MXC Frame buffer driver. This option is
dependent on the CONFIG_FB option. In menu configuration, this option is
available under:
Device Drivers > Graphics support > MXC Framebuffer support
By default, this option is Y for all architectures.
• CONFIG_FB_MXC_SYNC_PANEL: chooses the synchronous panel framebuffer.
This option is dependent on the CONFIG_FB_MXC option. In menu configuration,
this option is available under:
Device Drivers > Graphics support > MXC Framebuffer support > Synchronous
Panel Framebuffer
By default this option is Y for all architectures.
• CONFIG_FB_MXC_LDB: selects the LVDS module on iMX53 chip. This option is
dependent on CONFIG_FB_MXC_SYNC_PANEL and CONFIG_MXC_IPU_V3
option. In menu configuration, this option is available under:
Device Drivers > Graphics support > MXC Framebuffer support > Synchronous
Panel Framebuffer > MXC LDB
• CONFIG_FB_MXC_SII9022: selects the SII9022 HDMI chip. This option is
dependent on CONFIG_FB_MXC_SYNC_PANEL option. In menu configuration,
this option is available under:
Device Drivers > Graphics support > MXC Framebuffer support > Synchronous
Panel Framebuffer > Si Image SII9022 DVI/HDMI Interface Chip
6.5 Unit Test
In order to execute the tests properly, make sure that you select
the util-linux package and load the following modules:
insmod ipu_prp_enc.ko
insmod ipu_bg_overlay_sdc.ko
insmod ipu_fg_overlay_sdc.ko
i.MX 6Solo/6DualLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013
64
NOTE
Freescale Semiconductor, Inc.