Switch On - Atmos C 051 Thorax Operating Instructions Manual

4.2.2 Display symbols
Figure
4.3

Switch on

Battery status display / charging indicator
Key-lock
Therapy recording in progress
Therapy hold
Therapy in progress
Upcoming warning suppressed
Safety check required
1. To switch on the ATMOS
sensor above of the
2. The welcome monitore appears with the software version number in
the bottom right corner.
3. After a short while the leakage test (Chapter 4.4) strats automatically.
4. Subsequently "Therapy progress" will appear in the display.
By pressing the buttons you can start a new therapy recording.
5. The main display appears.
The device is now ready for use.
Function
C 051 Thorax please touch the
®
symbol for 2 seconds.
21