Using The Wizard For Initial Configuration - Observint N4 User Manual

SECTION 2: INITIAL SETUP

2.2 Using the Wizard for initial configuration

Use the Wizard to setup the basic configuration of your system. Advanced configuration options are available in the Setup menus.
Refer to the firmware user manual (to be provided) for your recorder for more information.
1. When the initial Wizard window appears, click Start Wizard to continue.
2. The next Wizard screen is used to configure the network settings of the recorder. Initially, the recorder acquires network using
DHCP (Dynamic Host Configuration Processor) which usually exists somewhere on your LAN. DHCP provides network settings
that are compatible with other devices on your LAN.
8 www.Observint.com