Table of Contents
Advertisement
SECTION 8: SYSTEM SETTINGS
8.3.5 Auto Reboot
Use this menu to configure the recorder to automatically reboot on a schedule. This practice is recommended to maintain the
operational integrity of recorder.
To setup Auto Reboot:
1. Check the Auto Reboot select box to enable this feature.
2. Open the Time drop down list, and then select either Every Day, Every Week, or Every Month.
3. Depending on your selection, use the lower menus to define what day and time the reboot will occur.
4. Click Apply to save your settings. You can also click Default to setup a reboot every Sunday at 12:00 am.
8.4 IP Camera Maintain
8.4.1 Upgrade
Use the Upgrade menu to upload a firmware file into a IP camera. To use this menu:
N4, N8, N16, N32 NVR V8.1.0 User Manual
69
Advertisement
Table of Contents
