Load Default - Observint N4 User Manual

SECTION 8: SYSTEM SETTINGS
1. In the list of IP camera channels, check the select box for the IP camera you want to upgrade.
2. Click Select File. In the Select an upgrade file .... screen, locate and then select the firmware file you need for the
Upgrade, and then click OK.
3. In the Upgrade menu, click IPC Ugrade to install the new firmware. You may be required to enter the admin user password to
initiate the upload. Allow the operation to complete before continuing.

8.4.2 Load Default

Use this menu to reset an IP camera to its factory default state . To use this menu:
70 www.Observint.com