Observint N4 User Manual page 74

SECTION 8: SYSTEM SETTINGS
2. Click Save Settings on the Parameter Management menu.
3. Follow the on-screen instructions to complete the operation. You must enter the admin user password to complete the save
operation.
4. Allow the operation to complete before continuing. The default name for the file you saved is DEVICE_Settings. See below.
5. Remove the flash drive from the USB port and store it in a secure place for possible use later.
To Load the Main Menu settings:
1. Plug a USB flash drive containing the Main Menu Settings you saved earlier into a USB port on the recorder.
2. Click Load Settings on the Parameter Management menu.
3. Navigate to the Main Menu Settings file you want to load and select it.
4. Follow the on-screen instructions to complete the load operation. You must enter the admin user password to complete the
load operation.
5. Allow the operation to complete before continuing.
6. Remove the flash drive from the USB port and store it in a secure place for use later.
68 www.Observint.com