Table of Contents
Advertisement
SECTION 2: INITIAL SETUP
To use this menu:
a. If you are NOT adding network IP cameras to the NVR for monitoring, click Next to continue, and to to the step: "6. In the
Disk menu... on page 13.
b. To add network cameras to the NVR for monitoring:
i.
Click the icon in the Edit column for a channel where a camera is not assigned. In the example above, channels 2
through 8 are not assigned.
In the Edit Connection Information menu, open the Switch Mode drop down list, and then select Manual
ii.
Mode. Click OK to close this menu.
In the IP Camera Wizard window, click the Search button in the lower left corner. A list of compatible IP
iii.
cameras installed on the network will appear in the left frame.
iv.
To add a network camera from the search results list, check the select box for the camera you want to add, and
then click the Add button (blue right arrow button) in the middle of the window. An Add IP Camera menu will
open.
12
www.Observint.com
Advertisement
Table of Contents
