SECTION 2: INITIAL SETUP
a. To configure the HDD for Overwrite:
viii. Check the select box for the HDD you want to configure from the list above.
Open the Overwrite drop down list, and then select Auto.
ix.
b. To format an HDD:
i.
Check the select box for the HDD you want to Format from the list above.
Click the Format button. Allow the format operation to complete before continuing.
ii.
7. Click Next to continue.
Use the Resolution menu to select an output resolution that matches your monitor. The NVR automatically adjusts the output
resolution during start up to match the highest resolution of your monitor.
14
www.Observint.com