Using The Mouse - Observint N4 User Manual

Manually triggering and clearing alarms
•
Import and export device configuration information
•
Network Function
Self-adaptive 10M / 100M / 1000 Mbps network interface
•
TCP/IP protocol, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, and iSCSI are supported
•
TCP, UDP and RTP for unicast
•
Auto / Manual port mapping by UPnPTM
•
Remote Web browser access by HTTPS ensures high security
•
Remote reverse playback via RTSP
•
Supports accessing the platform via ONVIF
•
Remote search, playback, download, locking and unlocking of the record files, and supports downloading files upon broken
•
transfer resume
Remote parameters setup; remote import / export of device parameters
•
Remote viewing of the device status, system logs and alarm status
•
Remote keyboard operation
•
Remote HDD formatting and program upgrading
•
Remote system restart and shutdown
•
RS-485 transparent channel transmission
•
Alarm and exception information can be sent to the remote host
•
Remotely start / stop recording
•
Remotely start / stop alarm output
•
Remote PTZ control
•
Remote JPEG capture
•
Two-way audio and voice broadcasting
•
Embedded Web server
•

1.1 Using the mouse

Mouse control
A standard 3-button (left / right / scroll-wheel) USB mouse can also be used with this NVR. To use a USB mouse:
1. Plug the USB mouse into the either the front panel or back panel USB connector of the NVR.
2. When the recorder is powered on, the mouse will be automatically detected. If the mouse is not detected, the mouse may not
be compatible with the NVR. Please refer to the recommended device list from your provider.
SECTION 1: SYSTEM OVERVIEW
N4, N8, N16, N32 NVR V8.1.0 User Manual 3