SECTION 2: INITIAL SETUP
a. When changing parameters in the Date and Time tab, consider the following:
Date: Click on the calendar icon to set the system date.
Time: Click to set the system time.
Date Format: Choose from the drop down menu to set preferred date format.
Time Format: Choose time format between 24-hour and 12-hour.
Time Zone: Set the correct time zone.
b. Click the NTP tab. To use a Network Time server to automatically set the date and time in your recorder, check the Enable
NTP box, and then select a Server Address from the drop down list. Click Update Now to acquire the current Date and
Time information.
c. Click the DST (Daylight Savings Time) tab. Setup the values in the DST menu to match your local DST custom, if preferred.
10
www.Observint.com