Table of Contents
Advertisement
5.5 Exception
To open the Exception event menu, click the Alarm tile in then Main menu, and then click the Exception link in the left column.
The Alarm Exception menu is shown below.
Use the Exception menu to configure the recorder to send alert(s) when certain conditions occur. At this time, the event types
include:
No Space on Disk: When an HDD is full.
—
Disk Error: If the HDD is not detected properly.
—
Video Loss: If a camera is not connected properly or a failure in the network or camera occurs.
—
1. For each Exception type, configure the following:
Switch: Check the select box to enable the monitoring of the event.
—
Buzzer: Set the buzzer duration when the event occurs (Off/10s/20s/40s/60s). To disable buzzer, select OFF.
—
Alarm Out: Check the select box to enable the external alarm device to sound. Recorder must be connected to an
—
external Alarm Out device, such as a buzzer. This feature is not currently implemented.
Latch Time: Specify how long an external alarm device will sound (10s, 20s, 40s, 60s). Recorder must be connected to
—
an external Alarm Out device, such as a buzzer.
Show Message: Check the select box to display a message on the screen when the Exception event occurs.
—
Send Email: Check the select box to send you an auto-email when the Exception event occurs.
—
2. Click Apply to retain your settings. Right click the mouse to return to the Live View Main menu.
SECTION 5: ALARM CONFIGURATION
N4, N8, N16, N32 NVR V8.1.0 User Manual
43
Advertisement
Table of Contents
