Table of Contents
Advertisement
Full Screen: Check the select box to expand the live view display of the channel to expand to full screen when a PIR
—
event is detected.
Picture, Video to Cloud: Check the select box(es) to upload images and/or videos to the Cloud service when a PIR
—
event is detected. To enable the cloud service, please see "7.2 Cloud settings" on page 53 .
2. Click Apply to retain your settings. You can also click the Copy button to copy your settings to different camera channels.
Right click the mouse to return to the Live View Main menu.
3. Click the PIR Detection button to (re)configure the PIR detection settings for a camera. Options in this menu are the same as
those in the Channel | PIR menu. See "3.2.10 PIR" on page 32.
5.3 IO alarm menu
This menu is reserved for future enhancement. It does not apply to NVRs without alarm input sensing.
5.4 PTZ Linkage alarm menu
To open the PTZ Linkage alarm menu, click the Alarm tile in then Main menu, and then click the PTZ Linkage link in the left
column. For PTZ cameras only, you can point the camera to a Preset when a Motion or PIR alarm event occurs. The Preset must be
preconfigured. The PTZ Linkage menu is shown below.
SECTION 5: ALARM CONFIGURATION
N4, N8, N16, N32 NVR V8.1.0 User Manual
41
Advertisement
Table of Contents
