Channel - Live Display; Live Display - Observint N4 User Manual

SECTION 3

Channel - Live Display

Use the Channel menus to configure the camera, live view display, PTZ setup, motion setup, convert mode, and other camera related
configuration parameters. The NVR supports only compatible IP cameras connected to the backpanel.

3.1 Live display

Use the Live display to view video streaming from your cameras. The display can show one video frame, or split into up to 16 video
frames. The display also includes Status icons in each frame that indicate is recording, or detected motion, and I/O alarm, or an HDD
problem.
Start button
Task Menu Bar
•
The Task Menu Bar appears at the bottom of the screen when you right click on the Live scren or move the mouse to the bottom of
the screen. To open the Task Menu Bar, click the right mouse button anywhere in the Live View screen.
Open Start menu Layout options
Screen layout
n x n
Task menu bar
Search Mainstream /
playback*
View channel Adjust
sequence volume
substream
Preview
policy**
N4, N8, N16, N32 NVR V8.1.0 User Manual
SECTION 3: CHANNEL - LIVE DISPLAY
Filter panel
Date / Time
Network
disconnected
Manual Record or
Alarm start / stop
Information
available***
19