Table of Contents
Advertisement
1. In the menu shown above, select the options you prefer for each camera channel:
Record Switch: Check the select box to enable recording this channel.
—
Stream Mode: Choose video streams you want to record. You can record either Mainstream (only) or Dualstream
—
(Mainstream and Substream). If Audio is enabled on the channel, audio will also be recorded.
PreRecord: When this option is enabled, the NVR will begin recording a few seconds before an alarm event occurs. Use
—
this option if recording is triggered by motion.
2. Click Apply to save your settings. You can also click Copy to copy your settings to other channels.
4.2.1 Record Schedule
Use the Record Schedule graphical user interface (GUI) to define when recording a channel is enable for either Normal (continuous)
recording, Motion triggered recording, or PIR triggered recording during the week. Notice that the schedule three rows for each day
(one to mark Normal recording, one for Motion recording, and one for PIR recording), and one column for each 30 minute period.
For each 30 minute segment of each day of the week, you can disable recording (no recording mode selected), or enable either the
Normal, Motion, IO, or PIR recording mode.
The Recording Schedule GUI is shown below. Note that each different recording mode is color-coded on the schedule. Shown here,
the schedule is configured for only for Motion recording, Sunday through Friday.
N4, N8, N16, N32 NVR V8.1.0 User Manual
SECTION 4: RECORD
37
Advertisement
Table of Contents
