Output Configuration - Observint N4 User Manual

SECTION 8: SYSTEM SETTINGS
6. Configure the DST Settings menu as needed:
Enable DST: If DST is used in your time zone or region, check the select box to enable this option.
—
Time Offset: Select the amount of time that DST changes the time in your time zone. This refers to the difference
—
between Coordinated Universal Time (UTC) and the local time.
DST Mode: You can select how Daylight Saving starts and ends:
—
Week: Select the month, a particular day and time when Daylight Saving starts and ends. For example, 2 a.m. on
*
the first Sunday of a particular month.
Date: Select the start date (click the calendar icon), end date and time when Daylight Saving starts and ends.
*
Start Time / End Time: Set the start time and end time for Daylight Saving.
—
7. Click Apply to save your settings.

8.1.2 Output Configuration

This menu allows you to configure video output parameters.
1. Configure the following parameters:
SEQ Mode: Select the screen layout you prefer when your NVR is in sequence mode. The layout determines how many
—
video channels will be displayed.
58 www.Observint.com