Pppoe Settings - Observint N4 User Manual

Gateway: This address allows the NVR to access the Internet. The format of the Gateway address is the same as the IP
—
Address. For example, "192.168.001.001".
DNS1/DNS2: DNS1 is the primary DNS (Domain Name Server) server and DNS2 is a backup DNS server. A DNS server
—
translates a website host name (such as ESPN.com) to the IP address understood by routers on the internet. The default
DNS addresses are 8.8.8.8 and 8.8.4.4 (provided by Google).
Internal NIC
IP Address: This IP address represents the gateway IP address of the internal switch of the NVR to which IP cameras are
—
connected. Each IP camera connected to the internal switch has a different IP address.
Subnet Mask: Subnet mask is a network parameter which defines a range of IP addresses that can be used in the
—
internal switch. Typically this parameter is 255.255.255.000 and rarely needs to change.

6.1.1 PPPoE settings

PPPoE (Point-to-Point Protocol over Ethernet) is a specification for connecting multiple users on an Ethernet local area network to a
remote site through common customer premises equipment, such as a DSL modem.
PPPoE is disabled by default. To use PPPoE:
1. Check the PPPoE select box, and then enter the User name and Password of the PPPoE device.
2. Click Apply to save your settings.
3. Reboot the recorder to activate the PPPoE settings.
SECTION 6: NETWORK CONFIGURATION
N4, N8, N16, N32 NVR V8.1.0 User Manual 45