Table of Contents
Advertisement
SECTION 8
System Settings
Use the System menus to configure see and configure General settings, Multi-users, Maintenance, and display system information.
8.1 General settings
Use the System Genera menu to configure general settings for the system including Language, video format, recording mode, etc.
1. In the General menu shown above, configure the following:
Device Name: Enter the preferred name for your recorder. The name can include both letters and numbers.
—
Device ID: Enter the preferred ID for your recorder. The device ID can include only numbers. This parameter is particularly
—
important when operating one recorder, among other recorders, with a remote control. You can identify the target
recorder using the Device ID.
Language: Select a language you would like the system menus to be displayed in. Multiple languages are available.
—
Video Format: Select the correct video standard for your region.
—
Menu Timeouts: Click the drop-down menu to select the time your NVR will exit the Main Menu when idle. You can
—
also disable this by selecting OFF, which will also temporarily disable password protection.
Show Wizard: Check the select box to display the Startup Wizard when you start or reboot your NVR.
—
2. Click Apply to save your settings.
8.1.1 Date and Time
The Date and Time menu includes three sections: Date and Time, NTP Settings, and DST Settings.
N4, N8, N16, N32 NVR V8.1.0 User Manual
SECTION 8: SYSTEM SETTINGS
55
Advertisement
Table of Contents
