Program - Memmert VO Series Operating Manual

7.6 Program

Prog
In the display, programs created using the AtmoCONTROL software can be trans-
ferred to the appliance and saved on a USB data storage medium. Here, you can also
select the program to be used in manual mode (see page 37 ) and delete programs.
To load a program from a USB storage
medium : Connect the USB storage
medium with the saved program(s) to
the interface on the right side of the
ControlCOCKPIT.
1. Activate the program display. To do
so, press the activation key on the
Prog
left of the
enlarged and the entry
matically highlighted. The programs
available for activation are shown on
the right. The program currently avail-
able for use – in this example
– is highlighted in orange.
Select
2. Access the
ing the confirmation key. All programs
available are displayed, including the
ones saved on the USB data storage
medium (identified by the USB symbol).
The program currently available for use
is highlighted in orange.
3. With the turn control, select the pro-
gram you want to make available for
use.
4. Accept the selection by pressing the
confirmation key. The program is now
loaded, which is indicated by the trans-
fer symbol.
5. As soon as the program is ready, the
selection returns to
program: Return to operating mode by
pressing the MENU key, as described
on page 36.
You can now remove the USB storage medium.
To delete a program, select
deleted the same way you can select a program for activation.
D39374 | Date 08/2018
display. The display is
Select
auto-
Test 012
function by press-
Select
to start the
Delete
with the turn control and select the program to be
Select Test 012
Delete Test 022
Test 013
Test 014
Test 023
Test 015
Menu mode
Program
Select Test 012
Delete Test 013
Test 014
Test 015
Test 016
Test 017
Select Test 012
Delete Test 022
Test 013
Test 014
Test 022
Test 015
Select Test 012
Delete Test 022
Test 013
Test 014
Test 023
Test 015
Select Test 012
Delete Test 022
Test 013
Test 014
Test 023
Test 015
59