Calibration - Memmert VO Series Operating Manual

Menu mode
6. Accept the selection by pressing the
confirmation key. The adjustment op-
tions are highlighted.
7. Set daylight savings to off () or on

( ) with the turn control – in this case

on ( ). Save the setting by pressing
the confirmation key.
Daylight saving time and standard time are not changed automatically. For this rea-
son, please keep in mind to adjust them at the beginning of each period.
8. Now, set date (day, month year) and
time (hours, minutes) in the same way.
Accept the selection by pressing the
confirmation key.

7.5 Calibration

The appliances are calibrated and adjusted at the factory. In case readjustment should
be necessary later on – for example due to influence of the chamber load – temperature
and pressure can be adjusted according to customer requirements with three individually
selected adjustment points:
►
Cal1Adjustment at low value
►
Cal1Adjustment at middle value
►
Cal1Adjustment at high value
To guarantee perfect control, we recommend to calibrate the appliance once a year.
7.5.1 Temperature calibration
For temperature adjustment, you will need a calibrated reference measuring device.
Each thermoshelf can be calibrated individually. This is only possible with the
AtmoCONTROL software (see AtmoCONTROL manual for description).
54
Date 12 . 05 . 2012
Time 12 : 00
Time zone GMT 00:00
Daylight savings
Date 12 . 05 . 2012
Time 12 : 00
Time zone GMT 00:00
Daylight savings
Date 27 . 05 . 2012
Time 12 : 00
Time zone GMT 00:00
Daylight savings
D39374 | Date 08/2018