Temperature Monitoring - Memmert VO Series Operating Manual

Cancel program
You can cancel an active program at any
time.
1. Press the activation key to the right of
the status display. The status display is
automatically highlighted.
2. Turn the turn control until the
symbol is highlighted.
3. Press the confirmation key to confirm.
The program is cancelled.
A cancelled program cannot be resumed at the point it was cancelled. It must be
restarted from the beginning.
End of program
End
is shown on the display to indicate
that the program has finished.
You can now
►
restart the program as described
►
select another program to run in menu mode (see page 59) and run it as de-
scribed.
►
Return to manual mode. To do so, reactivate it by pressing
the activation key next to the status display, then turn
the turn control until the hand symbol
in colour and press the confirmation key.

5.4 Temperature monitoring

The appliance is equipped with multiple overtemperature protection (mechanical/elec-
tronic) in accordance with DIN 12 880. This serves to avoid damage to the chamber load
and/or appliance in case of a malfunction:
►
electronic temperature monitoring (TWW)
►
automatic temperature monitor ( ASF)
►
mechanical temperature limiter (TB)
D39374 | Date 08/2018
Fr 20.10.2010 20:31
12.Sept.2012
manueller Betrieb Test 012
Ramp 3
GRAPH GRAPH
■
stop
12.Sept.2012
End
Test 012
is highlighted
Operation and control
10:44
APH
12.Sept.2012
Cancel program
Test 012
12.Sept.2012
End
Test 012
10:49
12.Sept.2012
Manual Mode
10:48
10:49
13:44
37