Memmert VO Series Operating Manual page 23

3.5.3 Tilt protection
Mount onto a wall the device with the tilt protection pre-assembled on the back:
1. Remove the screw right at the bottom from the tilt protection (Fig. 15).
2. Turn the tilt protection upwards by 90° twice (Fig. 14).
3. Drill a hole, insert a dowel and screw the tilt protection to a suitable wall (Fig. 16).
Fig. 14 Remove the
screw right at the bottom
from the tilt protection
D39374 | Date 08/2018
Fig. 15 Turn the tilt
protection upwards
Delivery, transport and setting up
Fig. 16 Screw the tilt protection
onto the wall
23